sliding
patio doors repairs (
read this blog post from horner-drachmann.technetbloggers.de)
Your sliding patio doors will bring the outdoors in to your home and improve the efficiency of your home's energy usage. However, with time, they could show signs of wear and tear that require some attention.
Luckily, the majority of problems with sliding patio doors are fairly simple to address. Find out more about
how to repair patio door lock to keep your patio doors looking and working like new:.
Dirty or Damaged Tracks
One of the main reasons for sliding patio doors that do not open is clogged or dirty tracks. Over time, the grit and grime of daily use accumulates on the track and can cause the door to jam or even fall apart completely.
This buildup can be minimized by including regular light cleanings of
sliding glass patio door repair doors and tracks during your regular chores. Begin by cleaning large debris off the tracks. Then make use of warm water and non-abrasive cleansing products, such as dish soap, to wipe them down. Adding a bit of vinegar to your cleaning solution can also aid in the removal of stubborn grease and dirt staining.
If your sliding door still not moving smoothly after you have followed these steps, this could be a sign there is more damage. This may require a professional to fix or replace the door. There are a few basic solutions you can try before calling in professionals to avoid expensive repairs or replacements.
Place a doormat under your sliding doors. This will help to keep dirt out of the tracks. Regularly trim any plants and bushes that are in close proximity to your sliding door to limit the amount of debris tracked into the tracks. Also, make sure you close the door correctly so that it doesn't hit the tracks and cause damage to the wheels and rollers. You can increase the lifespan of your doors by maintaining them clean and lubricated.
Rollers that are misaligned
Sometimes the sliding
patio screen door repair near me door becomes misaligned or gets stuck. This usually happens due to dirt or other obstructions that can be easily removed. Sometimes it's due a bent roller or track. In this case you can re-align the rollers by taking them off with the adjustment screws, and then cleaning with rubbing alcohol. Be careful because these parts are delicate.
If your doors are stuck, you can apply lubrication to the rollers. This will lessen friction and allow them to move more easily. Use a silicone-based product, since petroleum-based lubricants tend to attract dirt more quickly. It is also essential to clean the rollers and tracks prior to lubricating them.
After cleaning the rollers you can put them back in place using the adjustment screws. It's recommended to apply the same lubricant that you used when cleaning them. Make sure you push the rollers fully in their channels when reinstalling them. Then, you can check your door to see if it now slides effortlessly.
If the problem continues, it might be necessary to take down your door and examine the tracks and rollers for any other issues. If the tracks or rollers are badly bent, they may need to be replaced. It's best to hire a professional to install the tracks or rollers in this situation.
Warped Glass
Sliding glass doors are excellent for bringing the outdoors into the room and letting in natural sunlight however, they can also be prone to damage that needs repair or replacement. The most frequent problems that occur include warping, cracking and fading. Warping occurs when the components which make up your sliding glass patio door start to degrade as a result of exposure to heat, sun and other environmental elements. Cracks are often caused by the impact of a collision, for example from a ball or lawn mower run-in, and fading generally is caused by repeated contact with sunlight or other elements of nature.
If your sliding patio doors aren't easy to open or close it could be an indication that their rollers and tracks are not functioning correctly. This problem may be caused by the accumulation of dirt, rust, or debris in the track or wheels or due to a lack of or lubrication. Regularly cleaning the rollers and tracks clearing obstructions and applying silicone spray can help resolve this problem.
Another reason your sliding patio doors may be difficult to open or close is because the locking mechanism has become faulty. It could be caused by misalignment, wear and tear or the combination of both. To fix this, simply adjust the locking mechanism by turning the adjustment screws at the bottom.
Air leaks or drafts around your sliding patio door are a typical issue that can decrease their energy efficiency. They are usually caused by damaged weather stripping or poor alignment of the doors and can be easily fixed by replacing the weather stripping and re-aligning the doors.
Loose Handle
When a sliding door's handle becomes loose, it can be quite frustrating and make it difficult for people to open the door. This problem is usually caused by an incorrectly aligned locking mechanism which can be corrected by loosening the screws that hold it in place and tightening them until they're snug against the door jamb.
Another reason for a loose handle is that it has become detached from the spindle that connects the interior and exterior handles. This usually happens as a result of a variety of factors, including over use wear and tear or simply aging. If the issue isn't treated promptly, it could eventually lead to the whole handle becoming loose and eventually falling off completely.
To resolve this issue it is necessary to find the screws that connect the handles' exterior and interior. These screws are usually hidden behind plastic tabs that can be removed with a flathead (or a Phillips head screwdriver in some cases) screwdriver. Keep these screws in a safe place to ensure they don't get lost.
After removing the old handles, the next step will be to take off the spindle. This can be done by tapping on the end with a mallet or hammer until it falls free from its place inside the door. The new handle can be installed by simply placing the spindle through the hole in the handle inside and inserting the other end of the spindle through the hole in the outside handle. Once the handle is installed and tightened, screw back the screws and then check to ensure that the lock and unlock mechanism is working properly.
Unusual Weatherstripping
A worn or cracked weatherstripping may allow air and water to seep through your patio doors, which can compromise the comfort and energy efficiency of your home. It could let in moisture and create drafts that will increase your cooling and heating costs. It's easy to replace faulty weatherstripping with no professional help. First, you need to take off the old stripping by either loosing its staples using a screwdriver or prying it with a putty knife, and then pulling it away from the door. Then, you can clean the area, and apply a layer of weatherstripping which is secured with an adhesive. This will prevent leaks and improve the comfort.
If your sliding patio door is not working as it should, you must to fix the problem immediately to prevent further damage and to keep them functional for many years to come. Depending on the degree of the issue, DIY or professional repair/replacement could be the best option.
Most sliding patio door problems are caused by dirty rollers, faulty tracks, and a loose handle. In most cases these issues can be fixed through regular maintenance and cleaning, including oiling the track and rollers, as well as adjusting them and tightening the hardware. However, if these methods aren't working, it's best consult a professional for advice to ensure that your patio door is working just as it should. Review the warranty information before you decide to replace or repair your
double glazed patio door repairs door. This can save you money on repairs or replacements later on.
