Repairs to uPVC Windows
uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.
Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and improve the efficiency of energy.
1. Broken Glass
If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good shape.
Single-pane windows are fairly simple to replace and will usually fit into the frames that were previously in use very easily. However, if you have double pane windows that are held in place by internal beading it will be more difficult to remove the old panes and put in new ones. In this case, you will need to source some plastic spacers that assist the new pane to fit properly into the window frame.
If you're planning attempt to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the cloth instead of onto the floor where they could be trodden under and cause further damage.
After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and repair the
window repairs near me. This will also act as a barrier, deterring any intruders from getting access into your home. If the distance between the window and the door is substantial, you may want to use a security screen that also has an opening. This will give you the best of both.
2. Sagging
uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a number of problems that include sagging. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from getting worse.
To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. Then, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in place.
If you are unable to move the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.
uPVC handles may also loosen. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. The first step is to close your window and do an initial test to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.
3. Water Leaks
If you awake to wet floors and damp walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be done by any DIYer who is competent. Based on the severity of the issue the caulking used previously may require removal before a new layer of caulk can be applied. It is important to remember that when it is about
upvc window repairs (
coyle-mohamad-2.mdwrite.net official blog), you should not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.
Check that any drainage holes are free of debris in them and ensure that the sill pan is properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.
Mold spots and rotted sills are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.
It is also important to keep in mind that if the leakage is coming from between the glass of your
double glazed window repairs near me-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and open with a breeze it could be the hinges that are at the fault. These are easily repaired by any skilled DIYer and are usually done within a few minutes.
Like any mechanical part hinges will be damaged over time. It is an easy process, but it's simpler with someone else to assist in holding the frame in place.
It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.
The issue can be caused either by opening the window incorrectly or by a poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to provide assistance.
It is also important to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the
window repairs near me easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a few different things. The hinges can also become disaligned as a result of wear, causing a gap where the sash meets frame. If they're beyond repair, it may be necessary to get them re-aligned. Second, the interlock can be unbalanced. This is located on the hinge's side and might require to be cleaned. In certain instances it might be necessary to replace these.
The next most common reason for draughts is window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.
Another method of reducing draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be placed over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!
With a little maintenance and repair your windows made of upvc will provide an excellent level of security and insulation for your home. It is essential to remember that all windows eventually wear out and it may be more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it is best to seek professional assistance immediately.
